Epson ET-3710 Connect

The Epson EcoTank ET-3710 printer is an all-in-one printer that takes care of your everyday printing needs. This printer design makes it perfect for the office and home if you need to get printed documents or the kids need to submit their projects. The setup is simple and quick. We have created step-by-step instructional content to guide you through the setup and installation.If you are looking for a quick Epson ET-3710 connect; you have the option of downloading the Epson Smart Panel App and get it connected to a smartphone – Windows OS or Mac OS.

Epson ET-3710 setup

  1. Begin the process by unboxing the Epson EcoTank ET-3710 printer to complete the first-time setup.
  2. Place the printer on a flat surface and remove all the protective material.
  3. Connect the power cord to the rear end of the printer and the other to a power supply.
  4. Load the paper in the paper cassette and fill in the ink tanks.
  5. Proceed to download the printer driver. Visit the Epson website and key in details, and download it.
  6. Complete the installation process by following the on-screen prompts.
  7. The setup wizard will prompt you to connect to a wireless network or USB.
  8. If you choose the wireless option, then proceed to key in the WiFi credentials.
  9. Within a few seconds, the connection will be complete.
  10. Download and install the Epson ET 3710 connect printer setup utility to print the document and email document.
If you think the Epson ET-3710 printer setup is challenging, then you have the option of contacting us to complete the first–time setup of the Epson ET-3710 printer.

Epson ET-3710 Driver

Install the Epson ET-3710 driver through the Epson website. All that is needed to be done is to download and install the driver. We have devised a simple step by step process that can help you download and install the Epson EcoTank ET 3710 driver.

Epson ET-3710 Driver Windows

  1. Visit the Epson website to download and install the Epson ET-3710 driver.
  2. Enter the Epson printer models and choose the operating system. In this case, Epson ET-3710 and the Windows OS.
  3. Choose driver software and download it. Proceed with the installation process.
  4. Connect the printer to a network using a USB or Wireless Connection. The setup wizard will prompt this.
  5. If you choose the wireless connection, then enter the key in the wifi credentials prompt.
  6. The connection will establish and take a test print to ensure the driver software is installed properly in a few seconds.

Epson ET-3710 Driver Mac

  1. Once the initial setup of the Epson ET-3710 printer is complete, proceed to visit the Epson website to download and install the Epson ET-3710 driver.
  2. On being directed to the website, key in the details as prompted, such as the printer’s model – Epson ET-3710 and Mac OS’s operating system.
  3. Choose a suitable driver and proceed to download and install it.
  4. During the installation process, you will be prompted to connect to a network. The two options are USB and Wireless connection.
  5. If you choose the Wireless connection option, then key in the credentials.
  6. The connection will be established in a few seconds.

Epson ET-3710 Wireless Setup

  1. Once the physical setup of the Epson ET-3710 printer is complete, the installation will take place. During the installation, the setup wizard will prompt you to connect to a network.
  2. If it fails to connect at this point, you have the option to connect to a wireless network using the printer’s control panel.
  3. Followed by this, press the home button and choose the wifi icon.
  4. Now the wireless setup wizard will appear on the printer screen. Here a list of the available network will appear.
  5. Choose the desired network and key in the credentials.
  6. The Epson ET-3710 printer will now be connected to a wireless network in a few seconds.

Take a test print to ensure that the Epson ET-3710 printer is properly connected to a wireless network.

If you were unable to connect to it, then you have the option of contacting us and allowing our professionals to assist you in the process.

Epson ET-3710 Troubleshooting

Epson ET-3710 printer offline

  1. Start the process by ensuring all the cables are intact and connected properly.
  2. Make the Epson EcoTank Photo ET 8550 the default printer.
  3. Ensure that the driver installed for the Epson printer is updated.
  4. Check the same for the device. The software should be updated.
  5. Complete other physical checks like sufficient ink in the ink tank, blocked nozzles and wrong insertion of paper.
  6. Make sure that all the wireless connections are active and stable.
  7. The device should be updated with the latest software.
  8. The Epson printer driver should be updated, if not, visit the Epson website and complete the process immediately.
  9. After the installation procedure to open the Service app and double click on the Printer Spooler twice. Now, set the start type to Automatic.
  10. These steps should remove any malfunction that caused the printer not to print.

Epson ET-3710 – not printing

  1. Ensure that the cables are intact and connected properly.
  2. Check if the Epson ET-3710 is the default printer. If not, make it the default printer.
  3. Check if the printer has the latest updated driver. If not, visit the Epson website to download and install it.
  4. Perform the same check for the device. Check if the software has been updated. If not, update the device and give it a quick check.
  5. Once the setup is complete, open the Service App and search for the Printer Spooler.
  6. Double click on it and changes the start type to Automatic.

This should rectify the error. If you notice that the issue still prevails and you cannot handle the issue, contact the professionals.

Epson ET-3710 printing blank pages

  1. Check if the document that is being printed is not blank.
  2. Ensure that the paper is inserted properly and is of good quality.
  3. Look for other issues such as no ink or internal printer settings.
  4. Clear any nozzle blocks that could be causing an issue. Refill the tank with ink if necessary.
  5. Ensure that there is an active wireless network and that both the device and the printer are connected to the same network connection.

These steps should assist in the process of removing the above issue.

  1. Begin the process by unboxing the Epson EcoTank ET-3710 printer to complete the first-time setup.
  2. Place the printer on a flat surface and remove all the protective material.
  3. Connect the power cord to the rear end of the printer and the other to a power supply.
  4. Load the paper in the paper cassette and fill in the ink tanks.
  5. Proceed to download the printer driver. Visit the Epson website and key in details, and download it.
  6. Complete the installation process by following the on-screen prompts.
  7. The setup wizard will prompt you to connect to a wireless network or USB.
  8. If you choose the wireless option, then proceed to key in the WiFI credentials.
  9. Within a few seconds, the connection will be complete.

If you think the Epson ET-3710 printer setup is challenging, then you have the option of contacting us to complete the first–time setup of the Epson ET-3710 printer.

If You Have Any Question,
Feel Free to Call

Get in touch with our tech support team and acquire the perfect assistance for Epson printer setup, driver setup, and wireless setup.

Click to Call